Puff, puff, paint: How to freehand etch glassware with fabric paint

Guestpost by Liz Gubernatis on Feb. 16th

We talked about etching glass using templates a while ago, but what if you want to free-hand?

Here's how puffy paints can help you do so.

Mrs. Pacman

Personalizing some fabulous glassware is a great way to make a thrifty find into something one-of-a-kind.

Whether you're etching a pair of toasting flutes, personalizing a couple of pimp cups, or making your own etched beer steins, here's a method for free-handing your finished look for something that is totally your own using just a handful of materials.

Materials and Tools:

Puffy Paint (Fabric paint that's puffy, in little hand-held squeezy bottle form, like Tulip Puffy Paint. You'll find this in a craft store or craft section of many stores. Needs to be puffy. Trust me — this way it forms its own barrier for the etching cream.)

Etching Cream — also from craft store. I like Armour Etch and a small bottle is just fine. You don't use a ton of it on any single project, generally.

Glass(es) to etch

Masking tape

Special Note Regarding Puffy Paint: Get a dark color that's easy to see on the glass. Using a white puffy paint is a bit harder than using a nice dark color. I used black paint for this tutorial.


Step 1: Clean and dry your glassware. If there's any residual stickiness from a pricetag, a bit of nail polish remover should help.

Step 2: Use your masking tape to mark off a straight line on your glass. Putting the tape on the inside of the glass lets you use it as a guideline without it getting in the way.


Step 3: Shake up and test the puffy paint on a piece of paper or paper towel to get the feel for how much pressure to squeeze with as you write.

scribble test

Step 4: Using your masking tape as a guide, like the line on a loose leaf paper, write your name or message on the glassware. Alternatively, draw your picture or pattern. Remember perfection isn't the point –- this is freehanding, after all.


Step 5: Once you've completed your designed space, draw a barrier around it. This may be an oval, a stripe all away around the glass, some sort of crazy frame — whatever you like. Make this barrier nice and thick — double or triple the thickness of your other lines.


Step 6: Let the puffy paint dry. (I know, I'm forever doing this to you fine folks — gotta let it dry completely, which may be up to several hours or even overnight. Important step, though — patience is rewarded!)

Step 7: Once dried, you can apply your etching cream according to the instructions on the bottle. Always be safe with this stuff — it etches glass, so it'll totally etch YOU too. Be generous with the goop, but don't let it drip outside your barrier. If you're doing more than one piece of glassware, complete this step one at a time. Trust me on this.


Step 8: After waiting for the etching cream's instructions time to pass, you can scoop any goop back into your bottle or go ahead and rinse your glass under running water, washing away any and all the cream, leaving just the puffy paint.


Step 9: Peel off the puffy paint — a fingernail will help you get the first piece going. Everywhere you painted was protected from the etching, and your background etched nicely.


Step 10: TaDa! Now repeat steps 7-9 for your other pieces. Puff, puff, paint, ladies and gents, and freehand your gorgeous glassware.

Mrs. Pacman

Finished glasses


You can use this on goblets, champagne flutes, beer steins, glass teacups, plates, platters — anything glass, really.

For plates and platters, to leave them food-safe, your best bet is to etch the bottom of the plate, so the design can be seen from the top, but won't etch the surface in contact with food. Make sure to write backwards, if you're using words/messages on plates and platters. One great gift version of this is to etch the bottom of a glass pyrex pan with a name, message, or favorite recipe.


If you hate your design, just let it dry, peel it off, and try again (before etching, of course).

Some folks like to draw the barrier lines first. I find that if I do that, I drag my hands into them as I try to draw inside them.

As a "righty" I begin on the left of my design and continue to the right to avoid doing that. As a "lefty" I would reverse that — starting on the right and moving left.

Your Turn!

Will you brave freehanding your glassware? Comment below telling us how you plan to make this project your own. What kind of glassware will you embellish, and how?

Read more posts about: ,

About Liz Gubernatis

Liz is a Pepsi addict who married her sword-wielding urban Viking (who probably inspired the “What’s in YOUR wallet?” commercials) on 1-1-11. Originally from Nebraska, she spent some time on the East Coast but left before it made her hard-hearted, landing back in the Midwest, where she thrives. She sews, paints, cooks, bakes, plays with paper, computers and cats, loves chocolate, peanut butter, and popcorn, and frequently purges her apartment to make room for more fabric, craft supplies, and projects to play with.